Space C - Prestige Designs

Space C

Cantilever Snack-Bar

Bianco Puro Matt Satin Lacquered Finish

Nordico Brushed Oak Finish

"Pendula" Handle

30 Degree Door and “Grip” Handle

“Hul” Bottle Carrier Base Unit

“Plano” Boiserie

Shelf for “Plano” Boiserie

Cantilever Snack-Bar

Compact worktop for kitchen

Snack is characterized by a worktop and a th. 60 mm boxed backpanel, where inside are positioned “L”-shaped brackets to support the top.

Top is available in two depths and it’s modular in width. Thanks to its constructive compactness, it can be realized also in different widths in order to satisfy the request of spaces not easy to furnish

Bianco Puro Matt Satin Lacquered Finish

Quality kitchens and with a low emission of formaldehyde

This finish is realized using a wood medium density fiberboard panel with a low formaldehyde emission, finished with polyester on which is applied a matt satin lacquer in the nineteen possible colors.

This last working uses water-based products. The environmental impact is minimized.

In this way the harmful fumes are removed.
Matt satin lacquered finish is matt and uniform, the shallow embossing gives a good scratch resistance.
For cleaning, use a dampen cloth with water or a solution composed of water and alcohol.

Nordico Brushed Oak Finish

For veneered modern kitchens

This finish is realized using a wood particleboard panel with a low formaldehyde emission. The panel is coated by a veneer of veined brushed oak available in six different colors.

The deep brushing emphasizes the structure of wood, exalting features of “hardness” and “tangible texture”.

The matt painting process maintains unchanged the strong “personality” of the wood.
For cleaning, use a dampen cloth with water or a solution composed of water and neutral detergent, following the direction of the grain.

"Pendula" Handle

Handle for kitchen with a good grip

This built-in handle, proposed by Copatlife, is used only for tall units with coplanar sliding doors and it is available in four different finishes: satin, brill, bianco and brunito aluminum.

Pendula handle has a good grip, through a slight rotation of the frontal, and it allows to open and close easily doors of coplanar sliding doors tall units.

30 Degree Door and “Grip” Handle

Door for kitchen with practical design handle

The door has a tilt of 30 degrees on the upper edge, on which the “Grip handle” is mounted in the internal side in order to protect the door and to increase the grip.

The “Grip” handle is characterized by a profile, that presents a knurling for 50% of its surface and it helps the opening of the door.

And also from a technical detail with a small protrusion positioned only at the end of door’s edge.
The protrusion helps the opening and in addition, it creates frontally an aesthetic detail, which makes a frame to the upper side of the door.

“Hul” Bottle Carrier Base Unit

Open wine cellar for your modern kitchen

This 3.1 finish special unit has been designed to have a visible useful wine cellar in the kitchen environment.
The bottle carrier height is aligned to the height of the other kitchen base units. The bottle carrier containers of 110 mm in diameter are made of satin stainless steel and are not removable.

It is available in all 3.1 brushed oak and lacquered finishes.

“Plano” Boiserie

Boiserie with wall fastening fully concealed

Modular boiserie with wall fastening fully concealed, thanks to 3 mm thick side closures in satin, brunito aluminum and matt satin lacquered in the same finish of panel.

The canal of the horizontal profile, obtained overlapping modules, could be used for hanging up the “Iol” and “Chef System” elements or shelves th. 10 mm in composed panel of aluminum.

Shelf for “Plano” Boiserie

Aluminum shelves for kitchen ten kg payload

The shelf is thick 10 mm and it is manufactured a panel made of aluminum.

The shelf fit in the “Plano” boiserie lane and has a free horizontal positioning.

The maximal payload is 10 kg/lm evenly distributed. This element is user-friendly and with a minimal design