It is a “L”-shaped console element for the wall mounting with a bearing structure made of extruded aluminum. The perimeter edge and the lower...
Read moreThis finish is realized using a wood particleboard panel with a low formaldehyde emission. The panel is coated by a veneer of veined brushed...
Read moreThis finish is realized using a wood medium density fiberboard panel with a low formaldehyde emission, finished with polyester on which is applied a...
Read moreThe door has a tilt of 30 degrees on the upper edge, on which the “Grip handle” is mounted in the internal side in...
Read moreInnovative element for design and constructive process. The carcass is manufactured through folding system with veneered or lacquered panel th.19 mm, 45°...
Read moreModular boiserie with wall fastening fully concealed, thanks to 3 mm thick side closures in satin, brunito aluminum and matt satin lacquered in the...
Read moreThe shelf is thick 10 mm and it is manufactured a panel made of aluminum. The shelf fit in the “Plano” boiserie lane and...
Read moreConsole “Tila” Element
Ambra Brushed Oak Finish
Wasabi Matt Satin Lacquered Finish
30 Degree Door and “Grip” Handle
“Chef System” Container and Open Wine Cellar Element
“Plano” Boiserie
Shelf for “Plano” Boiserie
It is a “L”-shaped console element for the wall mounting with a bearing structure made of extruded aluminum.
The perimeter edge and the lower closing panel are available in twelve finishes of brushed and lacquered oak.
The top and the backpanel are available in: stainless steel, Fenix Ntm and ceramic gres “Easy Gres”.
The structure is suitable for built-in induction hobs with a 55 mm max. lower protrusion.
In the version resting one side on the base unit, it needs a stainless steel support on the other side to ensure the rigidity of the structure; in the suspended version, it needs two lateral supports.
This element is designed to unbundle totally the hob in relation to its common use.
This finish is realized using a wood particleboard panel with a low formaldehyde emission. The panel is coated by a veneer of veined brushed oak available in six different colors.
The deep brushing emphasizes the structure of wood, exalting its features.
The matt painting process maintains unchanged, to the eye and to the touch, the strong “personality” of the wood.
For cleaning, use a dampen cloth with water or a solution composed of water and neutral detergent, following the direction of the grain.
This finish is realized using a wood medium density fiberboard panel with a low formaldehyde emission, finished with polyester on which is applied a matt satin lacquer in the nineteen possible colors.
This last working uses water-based products. The environmental impact is minimized.
In this way the harmful fumes are removed.
Matt satin lacquered finish is matt and uniform, the shallow embossing gives a good scratch resistance.
For cleaning, use a dampen cloth with water or a solution composed of water and alcohol.
The door has a tilt of 30 degrees on the upper edge, on which the “Grip handle” is mounted in the internal side in order to protect the door and to increase the grip.
The “Grip” handle is characterized by a profile, that presents a knurling for 50% of its surface and it helps the opening of the door.
And also from a technical detail with a small protrusion positioned only at the end of door’s edge.
The protrusion helps the opening and in addition, it creates frontally an aesthetic detail, which makes a frame to the upper side of the door.
Innovative element for design and constructive process. The carcass is manufactured through folding system with veneered or lacquered panel th.19 mm, 45° frontal edge.
It is available in two widths and fixed height, with a “T”-shaped fixed divider or with sloping divider reversible for open wine cellar, with solid door and smoked or transparent glass.
The “Chef System” cab be jointed to the Boiserie “Plano” where can be shifted horizontally or on the wall with hanging devices.
Modular boiserie with wall fastening fully concealed, thanks to 3 mm thick side closures in satin, brunito aluminum and matt satin lacquered in the same finish of panel.
The canal of the horizontal profile, obtained overlapping modules, could be used for hanging up the “Iol” and “Chef System” elements or shelves th. 10 mm in composed panel of aluminum.
The shelf is thick 10 mm and it is manufactured a panel made of aluminum.
The shelf fit in the “Plano” boiserie lane and has a free horizontal positioning.
The maximal payload is 10 kg/lm evenly distributed. This element is user-friendly and with a minimal design